Transparent nylon-PA12,Transparent nylon: Poly(trimethylhexamethylene terephthalamide) ,PA610 Structural Formula:Transparent nylon;Features:The most outstanding char
Service E-mail：
sales@Anixt.comTransparent nylon-PA12
Transparent nylon:Poly(trimethylhexamethylene terephthalamide)
PA610 Structural Formula:
Transparent nylon Features:
The most outstanding characteristic of transparent nylon is its good transmittance, up to 90%. Its transparency is better than polycarbonate and close to polymethylmethacrylate. In addition, it has good thermal stability, impact toughness, electrical insulation, dimensional stability and aging resistance. Odorless and non-toxic. The shrinkage rate and linear expansion coefficient of the products are low. It is resistant to dilute acids, alkalis, aliphatic hydrocarbons, aromatic hydrocarbons, esters, ethers, Oils and fats, but not to alcohols. It is soluble in the mixture of 80% chloroform and 20% methanol. It is superior to polycarbonate and polymethylmethacrylate in environmental stress cracking resistance. It is a self extinguishing material with an oxygen index of 26.8. The water absorption rate of transparent nylon is 0.41%, which is lower than that of nylon 6 and nylon 66, and the water absorption hardly affects its mechanical and electrical properties. However, it will become turbid in boiling water. It is proved by electron microscope that it is caused by water filling the pores of polymer surface, rather than crystallization.
Transparent nylon Application:
Transparent nylon not only has the excellent properties of nylon, but also has better oil resistance, corrosion resistance, wear resistance and scratch resistance than other transparent plastics, so it has been widely used
1. Automobile
Automotive electronics and lighting, cooling and air conditioning system, oil system, power system and chassis, interior trim, oil cup
2. Electronic appliances
Electrical facilities, electrical equipment, connectors, lighting, optical instruments and computer parts, industrial production monitoring windows, X-ray viewing windows, measuring instruments, electrostatic copiers, developer storage, mobile phones and other portable equipment
3. Industrial and consumer goods
Heating system, household products, food packaging, hydraulic and pneumatic, mechanical engineering, medical supplies, transmission, bathroom, water and gas supply, sports and consumer goods, tools and parts
4. Optics
Lens, optical components, safety glasses, sunglasses, frame
5. Petrochemical Industry
Windows for containers in contact with oil, oil filters, butane lighters in oil depots, oil meters
Transparent nylon Index:
| Test Items | Standard Parameter Value | UNIT | TM125 | TM136 |
| Relative Density | GB/T 1033 ISO 1183 |
g/cm3 | 1.02-1.03 | 1.00 |
| Tensile Strength | GB/T1040 ISO 572-1/-2 |
MPa | ≥58 | ≥58 |
| Tensile modulus | GB/T1040 ISO 572-1/-2 |
MPa | ≥1500 | ≥1500 |
| Elongation At Break | GB/T1040 ISO 572-1/-2 |
% | ≥50 | ≥50 |
| Flexural Strength | GB/T 9341 ISO 178 |
MPa | ≥55 | ≥55 |
| Flexural Module | GB/T 9341 ISO 178 |
MPa | ≥1500 | ≥1500 |
| Charpy Non-Notch Impact（23℃） | GB/T 1043 ISO 179/1eU |
kJ/m2 | N | N |
| Charpy Non-Notch Impact（23℃） | GB/T 1043 ISO 179/1eU |
kJ/m2 | N | N |
| Charpy Notch Impact（-30℃） | GB/T 1043 ISO 179/1eA |
kJ/m2 | ≥8 | ≥7 |
| Charpy Notch Impact（-30℃） | GB/T 1043 ISO 179/1eA |
kJ/m2 | ≥6 | ≥6 |
| Hot deformation temperature（1.80MPa） | GB/T1634 ISO 75-1/-2 |
℃ | 125 | 135 |
* Note:Tell me about your parameters, Lyuechem company will give you a more satisfactory answer.
© 2015 - Anixt News Materials Co.,Ltd.Tianjin,China Powered by ANIXT
